11 November 2015
During a sand blasting operation, sand is 'blasted' onto your boat's body surface at high pressure through a water mixture. The abrasive nature of the process creates just enough force to remove various physical elements on the top surface of your boat's body, leaving the metal bare and polished. All this is done inside a special blast room while using specialised equipment and at the hands of highly-trained blast technicians. As a boat owner, you too can benefit immensely from sand blasting during a number of occasions as shown below.
12 August 2015
If you have dents in your car, the easiest way to remove them is by taking your car to a professional panel beater. However, if you don't have the time or resources to do that, there are other dent-removal strategies you can try. Check out these five DIY strategies: 1. Plunge out the dents Some dents respond to suction, and if your dents are smaller than the circumference of your plunger, you may be able to remove them using that bathroom tool.
4 August 2015
The chassis is one of the most important parts in a truck. They provide the needed support to hold the tray and carry heavy loads while maintaining vehicle stability. However, impact collisions can damage chassis frames and create a high risk hazard for your vehicle. In some cases, the damage may not be that easy to spot. If you detect any of the following anomalies with your truck or trailer, you may have a damaged chassis that needs alignment: